After the elevator is used, it is necessary to cut off the power supply. In order to save time and effort, many consumers will press and hold the "sleep" button like watching the TV, which is a waste of electricity, and there will be unsafe factors. The third is the standby state. The household appliance system software is still in operation, which is prone to circuit failure, and is easy to be struck by lightning in thunderstorm weather.

勤打黄油。轴销间的滑动摩擦力随使用时间的提高而增加，有时候还伴随噪杂的噪声，无盐黄油可减少磨擦，进而降低瞎忙的造成，节省电能。

Beat butter frequently. The sliding friction between the pins increases with the increase of service time, sometimes accompanied by noise. Salt-free butter can reduce friction, thus reducing the cause of busyness and saving electric energy.

禁止超重。额定值负载之内的运行，能够确保机器设备正常工作，但许多消费者在使用时，一味追求率，在调节情况下乃发生过载，那样只有事半功倍，得不偿失。

No overweight. The operation within the rated load can ensure the normal operation of the machinery and equipment, but many consumers blindly pursue high efficiency when using, and even overload under the condition of regulation, which will only get twice the result with half the effort, and the gain outweighs the loss.

搞好调试工作中。该试验仪不但能检测电动升降机的系数，而且还具备提早热身运动的实际效果，使液压缸、电机，特别是齿轮油，(冬天效果明显)提早进入工作状态，降低工作中摩擦阻力，节省电能。

Do a good job in commissioning. The tester can not only detect the safety factor of the electric elevator, but also have the practical effect of early warm-up movement, so that the hydraulic cylinder, motor, especially gear oil (obvious effect in winter) can enter the working state early, reduce the friction resistance in work, and save electric energy.

适当。这类操作方法，有有关工作经历的人都知道，当提升到总体目标高度时，便会松掉升高按键，由于惯性力，铝合金型材电动升降机还会继续升高一段距离，因此，在日积月累的控制以后，在节电领域，才会有显著的实际效果。

Appropriate. For this kind of operation method, people with relevant work experience know that when lifting to the overall target height, the lifting button will be released. Due to the inertia force, the aluminum alloy profile electric elevator will continue to rise for a certain distance. Therefore, after the accumulated control, there will be significant practical effects in the field of power saving.